Siemens EH 375ME11E Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Hob Siemens EH 375ME11E. Siemens EH 375ME11E 16 páginas.

Imprimir página

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Basic settings

The appliance has various basic settings. You can adapt these
settings to suit your own needs.
Display
Function
™ƒ
Acoustic signals
The confirmation signal and fault signal are switched off.
‹
Only the confirmation signal is switched off.
‚
All acoustic signals are switched on.*
ƒ
Automatically programming the appliance
™†
Off.*
‹
‚
-
ŠŠ
Run-on time.
Duration of the timer end signal:
™‡
‚
10 seconds*.
30 seconds.
ƒ
1 minute.
„
Power management function
™ˆ
‹
= deactivated.*
= 1000 W minimum power.
‚
. = 1500 W
‚
= 2000 W
ƒ
...
or
. = Maximum power of the hob.
Š
Š
Reset to factory settings
™‹
Personal settings.*
‹
‚
Reset to factory settings.
*Factory setting

To access the basic settings

The hob must be turned off.
Turn on the hob with the main switch.
1.
Within the next 10 seconds, press the
2.
4 seconds.
is displayed on the left of the screen and
™ƒ
10
and
"
‰
symbol and hold for
0
on the right.
‹
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Press the
symbol several times until the indicator for the
0
3.
desired function appears on the left of the screen.
Then select the desired setting in the programming panel.
4.
Press the
0
symbol again and hold for more than
5.
4 seconds.
The settings will have been correctly saved.
Quit
To leave the basic settings, turn off the hob at the main switch.