Ricoh Aficio 1050 Manual de Instruções - Página 25

Procurar online ou descarregar pdf Manual de Instruções para Impressora Ricoh Aficio 1050. Ricoh Aficio 1050 36 páginas. Sap printing
Também para Ricoh Aficio 1050: Manual (12 páginas)

Imprimir página

Bell105sysGB-FIN_FM.book Page 11 Wednesday, April 19, 2000 11:13 AM

System Reset

Energy Saver Timer

Panel Off Timer

Auto Off Timer

Description

If no operation is performed for a selected time, the ma-

chine will automatically return to initially selected display.

This function is called "System Reset". You can set the time

between 10 and 999 seconds.

Note

Default: 60 seconds

The machine enters the Energy Saver mode automatically a

certain time after your job is finished. You can set the time

between 1 and 240 minutes.

Note

Default: 15 minutes (1 minute steps)

The machine enters to the Panel Off mode automatically af-

ter your job is finished, after the selected time. You can set

the time between 10 and 999 seconds.

Note

Default: 60 seconds (1 second steps)

Reference

See "Auto Off Timer"⇒ P.10 "General Features".

The machine turns itself off automatically to conserve ener-

gy a certain time after your job is finished. This function is

called "Auto Off". You can set the time between 1 and 240

minutes.

Important

If you use these three functions (Energy Saver Timer,

Panel Off Timer and Auto Off Timer), when your copy

job ends, the machine will enter the Panel Off mode ac-

cording to the Panel Off Timer after the specified time.

Next, it will enter the Energy Saver mode according to

the Energy Saver Timer after the specified time. Then it

will turn itself off automatically according to the Auto

Off Timer after the specified time.

Note

Default:

• Type1: 90 minutes (1 minute steps)

Type2: 120 minutes (1 minute steps)

Auto Off might not be effective when an error message

is displayed.

To return to the Ready condition from Auto Off, the ma-

chine requires the same warm-up time as the time for be-

coming ready after its power is turned on.

Settings You can Change with the User Tools