Cisco Unified 6921 Manual de configuração - Página 15

Procurar online ou descarregar pdf Manual de configuração para Telefone IP Cisco Unified 6921. Cisco Unified 6921 16 páginas. Cisco systems telephone
Também para Cisco Unified 6921: Ficha de dados (5 páginas), Notas de lançamento (18 páginas), Ficha de dados (5 páginas), Manual do utilizador (38 páginas), Manual de Administração (14 páginas), Características (29 páginas), Manual do utilizador (24 páginas), Manual do utilizador (17 páginas), Início rápido (2 páginas), Manual de início rápido (7 páginas), Manual de referência rápida (7 páginas), Instalação rápida e manual do utilizador (12 páginas), Manual de referência (4 páginas), Cartão de referência rápida (2 páginas), Manual de Administração (19 páginas), Manual do utilizador (19 páginas), Manual rápido do utilizador (7 páginas), Manual de instalação rápida (12 páginas), Manual de referência rápida (2 páginas), Manual de referência rápida (2 páginas), (Português) Manual de início rápido (2 páginas), (Português) Manual de início rápido (2 páginas)

Cisco Unified 6921 Manual de configuração
Chapter
Table 3-2
Hardware Test
Power is Ready
Flash is Accessible
RAM Test Successful
Ethernet Test Successful
2.
3.
4.
If the phone successfully passes through these stages, it has started up properly. If the phone does not
start up properly, see the

Configuring Startup Network Settings

If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after installing the phone on the network:
Collect this information and see the instructions in
Unified IP Phone."

Configuring Security on the Cisco Unified IP Phone

The security features protect against several threats, including threats to the identity of the phone and to
data. These features establish and maintain secure communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
For more information about the security features, see the
Unified IP Phones" section on page
Security Guide.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
LED Diagnostic Status
The screen displays the Cisco Systems, Inc., logo screen.
These messages appear as the phone starts up.
Phone not registered
The home screen displays:
Current date and time
Primary directory number
Additional directory numbers and speed dial numbers, if configured (Only on Cisco Unified IP
Phone 6961)
Softkeys
"Resolving Startup Problems" section on page
IP address
IP subnet information
IPv6 addresses
TFTP server IP address
You also may configure the domain name and the DNS server settings, if necessary.
MWI
Hold
On
On
On
Chapter 4, "Configuring Settings on the Cisco
"Understanding Security Features for Cisco
1-14. Also, refer to Cisco Unified Communications Manager
Configuring Startup Network Settings
Mute
Speaker
On
On
On
On
On
On
On
9-1.
3-15