Ricoh P801 Instruções - Página 3

Procurar online ou descarregar pdf Instruções para Impressora Ricoh P801. Ricoh P801 5 páginas. Electronic license system (els)
Também para Ricoh P801: Manual de Instruções (12 páginas), Manual de configuração (32 páginas), Manual de configuração (32 páginas)

Electronic License System (ELS)

P801 Printer Instructions

CLEANING THE P801 PRINTER

 Printhead: After removing the used ribbon spindle,

Release the large green lever on the right side of the printer. The print head will become visible.

This is where heat transfers the ink from the ribbon to the label.

Carefully clean the print head and burn line area (the entire area from the black bar to the front

edge of the silver bar). Avoid touching this surface (body oils will cause damage to the print

head). Cleaning this area first will avoid transferring adhesive residues from other parts of the

printer.

 Platen Roller: The platen roller (the black rubber roller in the front of your printer) can acquire a

build-up of white residue. This residue may prevent the Valeron labels from advancing properly.

Clean the platen roller, then carefully turn the roller using the feed/pause button so that you may

clean all sides.

 Media Sensor: The media sensor and the clear plastic window covering it (inside on the bottom of

the printer, under the label path) should be wiped clean. If the sensor is not kept clear, it will not be

able to properly "read" the black stripes on the back of the Valeron labels; resulting in printer

malfunctions.

Wipe off all excessive alcohol with a paper towel.

Clean Close up

Figure 1. Clean

The thin black line in the middle of the red circle is the heat sensor

Dirty Close up

Figure 2. Dirty

updated January 22, 2009