Ricoh Savin CLP128 Manual de apoio ao produto - Página 5
Procurar online ou descarregar pdf Manual de apoio ao produto para Impressora Ricoh Savin CLP128. Ricoh Savin CLP128 25 páginas. Product guide
Imprimir página
G130/G131 Product Support Guide
Installation Requirements
1.
Temperature Range:
2.
Humidity Range:
3.
Ambient Illumination:
4.
Ventilation:
5.
Do not expose the machine to the following:
1) Direct cool air from an air conditioner
2) Direct heat from a heater
6.
Do not install the machine in areas that get exposed to corrosive gas.
7.
Install the machine locations lower than 2,500 m (8,200 ft.) above sea level.
8.
Install the machine on a strong, level base.
9.
Do not install the machine in areas that get strong vibrations.
Machine level
Front to back:
Within 5 mm (0.2")
Right to left:
Within 5 mm (0.2")
Power Requirements
Input voltage level: 120 V, 60 Hz: More than 11A (G130) / 12A (G131)
Permissible voltage fluctuation: ±10 %
Do not place anything on the power cord
The required wall outlet is a NEMA 5-15R
CAUTION: Make sure the outlet and the machine are grounded.
CAUTION: Insert the plug firmly into the outlet.
CAUTION: Avoid using an extension cord or adapter plug.
Installation Times
Mainframe: 30 minutes
Peripherals:
Peripherals, which can be installed by users:
PFU/LCT
Duplex Unit
IEEE1284
IEEE1394
Blue tooth
Wireless LAN
USB Host I/F
____________________5_____minutes
Direct Camera Printing ______________5_____minutes
Gigabit Ethernet____________________5_____minutes
Peripherals, which should be installed by technicians:
Finishers
Punch Kit
NOTE:
These are installation times for after the machine has been removed from the carton.
Version – 1.0
10 C to 32 C (50 F to 89.6 F)
15% to 80% RH
Less than 2,000 lux (do not expose to direct sunlight)
3 times/hour/person or more
15
minutes
15
minutes
5
minutes
5
minutes
5
minutes
5
minutes
15
minutes
15
minutes