Cisco 4500-M Manual de instalação - Página 11

Procurar online ou descarregar pdf Manual de instalação para Router de rede Cisco 4500-M. Cisco 4500-M 18 páginas. Upgrading memory
Também para Cisco 4500-M: Manual de substituição (16 páginas), Upgrade Manual (24 páginas)

Imprimir página

Installing Chassis into a Standard Rack

Take the following steps to install the chassis into a standard rack:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

This completes the standard rack-mount procedure.

Figure 11

10-32

machine

screws

On the rear of the rack, insert two 10-32 machine screws through the slots of the extenders

and thread them into the rack-mount threaded holes (see Figure 11).

While supporting the chassis shell, slide the rack-mount brackets into the installed rear

extenders. The standard rack-mount bracket, extender, and screws ﬁt together as shown in

Figure 12.

Mount the front of the chassis shell in the rack using two 10-32 machine screws on each

side of the front brackets.

In the rear of the chassis shell, insert two M3 machine screws on both sides to fasten the

brackets and bracket extenders together.

Replace the front panel by snapping it into the front of the chassis shell.

Reinsert the component tray into the shell.

Push on the back of the tray while at the same time pressing on the chassis release screw

(shown in Figure 2 and Figure 3) with the thumb of your right hand.

Retighten the chassis release screw.

Rear Bracket Extenders in a Standard 19-inch Rack

Mounting the Chassis in a Standard Rack

Equipment rack

Bracket

extenders

Front of the

equipment rack

Cisco 4000 Series Rack-Mount and Wall-Mount Installation