ACU-RITE 00595 Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Estação meteorológica ACU-RITE 00595. ACU-RITE 00595 10 páginas. Professional wireless weather station with wind sensor & atomic clock

Imprimir página

GENERAL WEATHER STATION FUNCTIONS

After the initial and general set-up, the following data will be displayed in different sections

on the main unit display.

MOON PHASE:

The moon phase indicator, found under the date display, shows the current phase of the

moon based on the yearly calendar.

CALENDAR FUNCTION: The calendar display, found under the time display shows the

current month and date with day indicator.

FORECAST ICONS: The main unit predicts weather conditions for the next 12 – 24 hours

based on the change in temperature and atmospheric pressure. The coverage area is up to

25 miles. Weather forecasts based on atmospheric pressure changes are about 70-75%

accurate. As weather conditions cannot be 100% correctly forecasted, we cannot be

responsible for any loss caused by an incorrect forecast.

More than 20 icons will represent the 24 hr. weather forecast. Some common icons include:

SUNNY

RAINY / SNOW

TREND INDICATORS: Trend indicators for outdoor temperature and humidity and wind

speed show the trend tendency based on the past and current weather conditions.

BAROMETRIC BAR GRAPH AND PRESSURE HISTORY: The main unit shows BARO-

METRIC pressure in two forms, numerically and as a pressure history graph. The graph

indicates the pressure changes (range from +0.24inHg to -0.24inHg/ -8hPa mb to +8 hPa

mb) of the current and past 1,2,3,6 and 12 hours.

WIND FUNCTIONS:

Digital Compass: The digital compass indicates

the direction from which the wind is coming from,

marked by the arrow indicator, with 16 possible

directions. The wind direction is shown here

coming out of the WEST.

Wind Speed: The wind speed values are located in

the center of the digital compass. The wind speed

is transmitted from the wind sensor and is

updated approximately every 18 seconds. The wind

speed shown here is 4 (mph).

Wind Peak: The wind Peak displays the highest recorded

wind speed over he past 1 hour.

CLOUDY

PARTLY CLOUDY

SPEED

WEATHER AND TIME ALARMS

ALARM SETTING MODE: The alarm setting mode allows the user to change several alarm

settings, which is done by accessing one mode after the other, simply by pressing the

"ALARM"" button. The individual alarm can be turned on and off by using the

"ON/OFF/RECORDS" button. When an alarm goes off, an audible tone will sound for one

minute.

Press and hold the "ALARM" button for 3 seconds to enter the alarm setting mode. The

time display and "AL" for alarm will be blinking. This indicates the user is now in the

alarm-setting mode. In alarm setting mode, to activate or deactivate any alarm, press the

"ON/OFF

" button.

For non-time alarms, the blinking "HH.H" means the high alarm value is to be set.

For non-time alarms, the blinking "LL.L" means the low alarm value is to be set.

While in the alarm mode, use "MIN" (-) or "MAX" (+) buttons to change any of the values.

Press and hold for rapid scroll through of any values. Press the "EXIT" button to exit any of

the above alarm modes. Press the "ALARM" button to stop the alarm for one day, or press

the "SNOOZE" button to turn the alarm time off for five-minute increments.

This weather station also comes equipped with a audible storm alarm. When activated, the

storm alarm will sound if there is a sudden or extreme drop in barometric pressure or if

there is a constant progressive drop in barometric pressure. NOTE: If no button is pressed

for 30 seconds, the alarm setting mode returns to the normal display mode.

Pressing the "ALARM" button during the alarm-setting mode scrolls through the following

settings:

1. Time alarm setting (hours, minutes)

2. Indoor temperature alarm (high, low)

3. Indoor humidity alarm (high, low)

4. Outdoor temperature alarm (high, low, at the current channel)

5. Outdoor humidity alarm (high, low)

6. Wind chill alarm (low)

7. Heat index alarm (high)

8. Dew point alarm (high, low)

9. Wind speed alarm

10. Storm alarm

MINIMUM & MAXIMUM RECORD MODE

The "MIN/MAX" buttons provide the user with information about the minimum and

maximum values of today's weather data. It also acts as an access mode for the daily and

long-term records, with the time and date of their recordings.

TO ACCESS THE MIN OR MAX VALUES (TODAY'S HIGH'S AND LOW'S):

Press the "MIN" or "MAX" button to display the corresponding highs or lows of the day.