Epson 1280 - Stylus Photo Color Inkjet Printer Manual de iniciação - Página 21

Procurar online ou descarregar pdf Manual de iniciação para Impressora tudo em um Epson 1280 - Stylus Photo Color Inkjet Printer. Epson 1280 - Stylus Photo Color Inkjet Printer 32 páginas. Product support bulletin(s)
Também para Epson 1280 - Stylus Photo Color Inkjet Printer: Substituição de cartuchos (2 páginas), Boletim de apoio ao produto (6 páginas), Boletim de apoio ao produto (1 páginas), Manual suplementar (1 páginas), Manual do utilizador (27 páginas), Manual de compatibilidade (1 páginas), Manual suplementar (2 páginas), Começar aqui (2 páginas), Brochura e especificações (2 páginas), Informações sobre o produto (13 páginas), Manual Iniciar aqui (6 páginas), Especificações (2 páginas), Manual do utilizador (12 páginas), Boletim de apoio ao produto (3 páginas), Boletim de apoio ao produto (2 páginas), Boletim de apoio ao produto (4 páginas), Boletim de apoio ao produto (7 páginas), Manual de instruções de instalação (8 páginas)

Sawgrass Technologies, Inc.

Tips for Successful

Sublimation

Tips for Polyester Fabric

Maintain appropriate heat press times.

§ Shortened pressing time will result in good surface color but the sublimation

dyes will not completely penetrate the polyester fibers. This leaves the dyes

more susceptible to wash out.

Longer pressing times will cause the dye molecules to penetrate deeper into the

fiber creating a washed out look. For guidelines on transfer times see the section

entitled Heat Transfer Instructions.

Maintain appropriate heat press temperatures

The correct temperature setting is vital for achieving desired results. Higher

temperatures can damage the polyester fibers to the point that they cannot

properly "hold" the dyes. For guidelines on transfer temperatures see the section

entitled Heat Transfer Instruction.

Maintain appropriate pressure

Too much pressure on the heat press may cause the dyes to penetrate too deeply

into the fabric causing a washed out look. For guidelines on transfer pressure see

the section entitled Heat Transfer Instructions.

Tips for Metal

To obtain the best results when printing onto metal, place the transfer between

the metal and an absorbent cloth or fresh, non-textured paper towel. This will

absorb any dyes that pass back through the paper and any moisture released

during the transfer process. If you have problems with inconsistently filled

areas, this may alleviate the problem.

Tips for Ceramic Tiles and Mugs

When transferring onto ceramic tiles and mugs, immediately peel the paper off of

the ceramic after removing it from the heat press. Once the paper has been

removed, cool the ceramic by submerging it in cool water, or run water over it

from a faucet. If paper residue remains on the surface of the ceramic, clean with

citrus cleaner. If you experience a significant paper-sticking problem, call your

SubliJet reseller for assistance

SubliJet IQ

Getting Started Guide for the EPSON Stylus Photo 1280