ACU-RITE 01608 Manual de instruções - Página 14

Procurar online ou descarregar pdf Manual de instruções para Estação meteorológica ACU-RITE 01608. ACU-RITE 01608 20 páginas. Rain gauge station

Imprimir página

Troubleshooting

Problem

No wireless sensor or

rain gauge reception

no bars

Display screen

not working

Outdoor temperature

and/or humidity is

flashing or showing

dashes

Inaccurate

temperature

or humidity

Can the rain gauge

remain outdoors in

freezing temperatures?

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

If the wireless signal indicator shows no bars:

• Relocate the display and/or the wireless sensor.

The units must be within 330 ft (100 m) of each other.

• Relocate the display and/or the rain gauge.

The units must be within 100 ft (30 m) of each other.

• Make sure both units are placed at least 3 feet

(.9 m) away from electronics that may interfere with

the wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium batteries

in sensor when temperature is below -4ºF/-20ºC). Do

not use heavy duty or rechargeable batteries.

NOTE: It may take a few minutes for display and sensor

to synchronize after batteries are replaced.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

Flashing of the outdoor temperature and/or humidity is

generally an indication of wireless interference.

1. Bring the wireless sensor and display indoors and

remove at least one battery from each.

2. Reinstall the battery in the wireless sensor.

3. Reinstall the battery in the display.

4. Let the units sit within a couple feet of each other

for a few minutes to gain a strong connection.

• Make sure both the display and wireless sensor are

placed out of direct sunlight and away from any heat

sources or vents (see page 11).

• Make sure the display is positioned away from

moisture sources (see page 11).

No, the rain gauge should be brought indoors when

there is a possibility of freezing temperatures. Water

expands when it freezes. If any water is left within the

rain gauge during a freeze, it can crack the plastic and

cause permanent damage.

Possible Solution