Cisco TelePresence System Codec C90
Contents
Audio outputs,
continued...
Line Out 1–4 (RCA)
4xRCA sockets, audio output 1-4
Can be configured as two stereo pairs.
Main connectors. Line Out 1 (left) and Line
Out 2 (right) are the main connectors to the
local loudspeaker system.
The local loudspeaker system may or may
not include the DNAM (Digital Natural Audio
Module).
Default configuration Line Out 1-2. In default
configuration, Line Out 1 and 2 are configured
as stereo speakers.
if a DNAM is present or SPDIF is active on
Line Out 1, then Line Out 1 provides a digital
stereo speaker signal and Line Out 2 is not
active.
Default configuration Line Out 3-4. In default
configuration, Line Out 3 and 4 are configured
as stereo line out for external recording
devices as VCR's or DVD recorders.
if a DNAM is present or SPDIF is active on
Line Out 3, then Line Out 3 provides a digital
stereo speaker signal and Line Out 4 is not
active.
SPDIF - Sony/Philips Digital Interface, used by
the Digital Natural Audio Module.
D14644.03 Codec C90 Physical Interface Guide TC4.1, February 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Introduction
Connecting to the codec
RCA pin-out
External view of socket
Signal
GND
RCA - Phono Plug (the Radio Corporation of
America)
The physical interface
The physical interface
4xLine Out
What is a Line output
A Line output consists of all signals from
local side and all signals from far end side.
What is a Speaker output
A Speaker output consists of all signals
from local side, except microphones, and
all signals from far end side.
18
Physical interface guide
Contact us
Left channel
The Left channel consists of all Left channel
and Mono signals.
Right channel
The Right channel consists of all Right
channel and Mono signals.
www.cisco.com
Imprimir página