Cisco Aironet 1400 Series Ficha de especificações
Procurar online ou descarregar pdf Ficha de especificações para Hardware de rede Cisco Aironet 1400 Series. Cisco Aironet 1400 Series 16 páginas. Wireless bridge
Também para Cisco Aironet 1400 Series: Manual (35 páginas)
Imprimir página
OSPF Sham-Link Support for MPLS VPN
Feature History
Release
12.2(8)T
This document describes how to configure and use a sham-link to connect Virtual Private Network
(VPN) client sites that run the Open Shortest Path First (OSPF) protocol and share backdoor OSPF links
in a Multiprotocol Label Switching (MPLS) VPN configuration.
This document includes the following sections:
Feature Overview, page 1
•
Supported Platforms, page 8
•
•
Supported Standards, MIBs, and RFCs, page 10
Prerequisites, page 10
•
•
Configuration Tasks, page 10
Configuration Examples, page 12
•
Command Reference, page 12
•
•
Glossary, page 16
Feature Overview
Using OSPF in PE-CE Router Connections
In an MPLS VPN configuration, the OSPF protocol is one way you can connect customer edge (CE) routers
to service provider edge (PE) routers in the VPN backbone. OSPF is often used by customers that run OSPF
as their intrasite routing protocol, subscribe to a VPN service, and want to exchange routing information
between their sites using OSPF (during migration or on a permanent basis) over an MPLS VPN backbone.
Figure 1
backbone.
Modification
This feature was introduced.
shows an example of how VPN client sites that run OSPF can connect over an MPLS VPN
Cisco IOS Release 12.2(8)T
1