Cisco TelePresence Server 7010 Manual de instruções de substituição - Página 2

Procurar online ou descarregar pdf Manual de instruções de substituição para Hardware de rede Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 18 páginas. 600w ac-input power supply and fan tray replacement
Também para Cisco TelePresence Server 7010: Manual de instruções de substituição (23 páginas), Manual de instruções de instalação (15 páginas), Manual de instalação (14 páginas), Começar a trabalhar (16 páginas)

Product Overview

Following are brief descriptions of the Cisco 7010 and Cisco 7505 routers, the power supply, the fan

tray, and the environmental monitoring functions. The power supply and fan tray exchange

information with the environmental monitoring software, although each operates independently.

Cisco 7010 and Cisco 7505 Overview

Figure 1 shows the interface processor end of the Cisco 7010 chassis.

Note

the same.

In the Cisco 7010, the Route Processor (RP) and Switch Processor (SP) (or the Silicon Switch

Processor [SSP]) are required system components and occupy the two top slots. In the Cisco 7505,

the Route Switch Processor (RSP1) is a required system component and occupies the top slot.

In both chassis, the remaining interface slots (three in the Cisco 7010 and four in the Cisco 7505)

support any combination of available interface types: Ethernet, Token Ring, FDDI, serial, HSSI, and

so forth.

The interface processor end of the router also contains the AC power receptacle, the system power

on/off switch, and the DC OK power status LED, all of which are part of the power supply but

accessible through cutouts in the chassis frame. (See Figure 1.) To the left of the power switch and

receptacle cutout is a ground screw that provides a chassis ground connection for ESD equipment or

a grounding wire.

Figure 1

On/off

power switch

The noninterface processor end of the chassis has a removable panel that provides access to the

internal components discussed in this publication.Two captive slotted fasteners secure the panel.

2 600W AC-Input Power Supply and Fan Tray Replacement Instructions

For the procedures in this publication, the Cisco 7010 and Cisco 7505 chassis are functionally

Cisco 7010—Interface Processor End

AC power

receptacle

Chassis

ground

DC OK

power indicator

Power supply