Cisco AS5200 - Universal Access Server Manual de início rápido - Página 9
Procurar online ou descarregar pdf Manual de início rápido para Servidor Cisco AS5200 - Universal Access Server. Cisco AS5200 - Universal Access Server 20 páginas. Universal access server
Também para Cisco AS5200 - Universal Access Server: Notas de lançamento (22 páginas)
Imprimir página
2
Install the Universal Access Server (continued)
E1/PRI
port 1 (DB-15)
E1/PRI
port 0 (DB-15)
E1 cable
Connect the Dual E1/PRI Card
for WAN Access
You will need two E1 cables to connect the dual
E1/PRI card to a WAN.
Note: E1 cables and E1 networks terminating units
are not included.
Universal access server
E1/PRI card
E1 networks terminating unit
DB-15, Twinax,
RJ-45, or
BNC connector
Step 1
Step 2
Step 3
Connect one end of the E1 cable to the
port labeled Port 0 on the rear panel of the
access server.
Connect the other end of the cable to an
E1 networks terminating unit.
Repeats steps 1 and 2 to connect a second
cable to the port labeled Port 1.
7