Cisco UCS B200 M3 Nota de instalação e manutenção

Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B200 M3. Cisco UCS B200 M3 36 páginas. Blade server
Também para Cisco UCS B200 M3: Manual de instalação (34 páginas), Nota de instalação e manutenção (37 páginas), Manual (8 páginas), Upgrade Manual (21 páginas), Nota de instalação e manutenção (28 páginas)

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Cisco UCS B200 M3 Blade Server Installation and

Service Note

The Cisco UCS B200 M3 (shown in

two CPU sockets using Intel E5-2600 series CPUs and up to 24 DIMMs; it supports one modular LOM

(dedicated slot for Cisco's Virtual Interface Card) and one mezzanine adapter. At this time, the UCS

B200 M2 (second generation) server is still available and is documented elsewhere. You can install up

to eight UCS B200 Blade Servers to a UCS chassis, mixing with other models or Cisco UCS blade

servers in the chassis if desired. The Cisco UCS B200 M3 is managed by Cisco UCS Manager version

2.0(2m) and later.

Figure 1

Asset tag

Blade ejector handle

Ejector captive screw

Hard drive bay 1

Hard drive bay 2

Power button and LED

1.Each server has a blank plastic tag that pulls out of the front panel which is provided so that you can add your own

asset tracking label without interfering with the intended air flow.

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Figure

Cisco UCS B200 M3 Front Panel

1) is the latest Cisco Intel-based, half-width blade supporting

UCS B200 M3

Network link status LED

Blade health LED

Console connector

10 Reset button access

11 Beaconing LED and button