Cisco UCS B200 M3 Nota de instalação e manutenção - Página 3

Procurar online ou descarregar pdf Nota de instalação e manutenção para Servidor Cisco UCS B200 M3. Cisco UCS B200 M3 36 páginas. Blade server
Também para Cisco UCS B200 M3: Manual de instalação (34 páginas), Nota de instalação e manutenção (37 páginas), Manual (8 páginas), Upgrade Manual (21 páginas), Nota de instalação e manutenção (28 páginas)

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

The beaconing function for an individual server may get turned on or off by pressing the combination

button and LED. See

The power button and LED allows you to manually take a server temporarily out of service but leave it

in a state where it can be restarted quickly. If the desired power state for a service profile associated with

a blade server or an integrated rack-mount server is set to "off", using the power button or Cisco UCS

Manager to reset the server will cause the desired power state of the server to become out of sync with

the actual power state and the server may unexpected shutdown at a later time. To safely reboot a server

from a power-down state, use the Boot Server action in Cisco UCS Manager.

Connectors

The console port allows a direct connection to a blade server to allow operating system installation and

other management tasks to be done directly rather than remotely. The port uses the KVM dongle cable

(N20-BKVM shown in

DB9 serial connector, a VGA connector for a monitor, and dual USB ports for a keyboard and mouse.

With this cable, you can create a direct connection to the operating system and the BIOS running on a

blade server. A KVM cable ships standard with each blade chassis accessory kit.

Figure 2

Conventions

This document uses the following conventions for notes, cautions, and safety warnings.

Notes and Cautions contain important information that you should know.

Means reader take note. Notes contain helpful suggestions or references to material that are not covered

Note

in the publication.

Caution

Means reader be careful. You are capable of doing something that might result in equipment damage or

loss of data.

OL-26624-01

Table 1

for details.

Figure

2) which provides a connection into a Cisco UCS blade server; it has a a

KVM Cable for Blade Servers

Connector to blade server slot

DB9 serial connector

VGA connection for a monitor

2-port USB connector for a mouse and keyboard

Cisco UCS B200 M3 Blade Server Installation and Service Note