Cisco Firepower 1600 Manual de instalação do hardware - Página 14
Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada Cisco Firepower 1600. Cisco Firepower 1600 44 páginas.
Imprimir página
Rear Panel
9
Rear Panel
Note
Although the Cisco Integrated Management Controller (CIMC) is not supported on the FMC, you can use
Lights-Out-Management (LOM) on the default management interface (eth0) on a Serial Over LAN (SOL)
connection to remotely monitor or manage the FMC system. For information about using LOM and SOL, see
the
Cisco Firepower Management Center Getting Started Guide for Models 1600, 2600, and 4600
information.
The following figure shows the rear panel of the FMC 1600, 2600, and 4600.
Figure 8: Rear Panel
1
3
5
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
10
Temperature status LED:
• Green—The chassis is operating
at normal temperature.
• Amber—One or more
temperature sensors breached the
critical threshold.
• Amber, flashing—One or more
temperature sensors breached the
unrecoverable threshold.
USB 3.0 Type A (USB 1)
You can connect a keyboard, and along
with a monitor on the VGA port, you
can access the console.
eth0 management interface (labeled 1)
Supports 100/1000/10000 Mbps
depending on link partner capability.
VGA video port (DB-15 connector)
2
USB 3.0 Type A (USB 2)
You can connect a keyboard, and along
with a monitor on the VGA port, you
can access the console.
4
eth1 management interface (labeled 2)
Gigabit Ethernet 100/1000/10000
Mbps interface, RJ-45, LAN2
6
CIMC interface (labeled M)
Not supported
Overview
for more