Epson Perfection 640U Series Manual de arranque - Página 15

Installing the Software

After connecting the scanner to your PC, install the scanner

software (EPSON TWAIN) from the CD-ROM.

Note:

If the scanner software is already installed and you are upgrading

your system to Windows

upgrade, and then re-install it using the same steps described in this

section.

Screen displays of Windows 98 are used to represent all versions of

Windows.

1. Make sure that the scanner is plugged in and on.

2. Turn on the PC, and start Windows.

Note:

You do not necessarily have to follow steps 1 and 2 above in that

order. USB cables enable you to connect or remove the scanner to or

from your PC easily, regardless of whether your PC and/or scanner

are on or off.

3. When the Add New Hardware Wizard dialog box appears,

insert the scanner software CD in the CD-ROM drive, then

click Next .

Caution:

After inserting scanner software CD in the CD-ROM,

"EPSON Software Setup" box could appear on your screen

if CD-ROM AutoRun feature is activated on your computer.

Do not process software setup at this time, close "EPSON

Software Setup" box then follows step 4.

2000, be sure to uninstall it before the