Cisco VG202 Manual de instalação do hardware - Página 35

Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada Cisco VG202. Cisco VG202 50 páginas. Voice gateways
Também para Cisco VG202: Manual de configuração do software (50 páginas), Manual (10 páginas), Manual de instalação do hardware (48 páginas), Manual de início rápido (19 páginas)

Chapter 3

Installing Cisco VG202 and Cisco VG204 Voice Gateways

If you are mounting the voice gateway on drywall, use hollow-wall anchors (1/8 inch with 5/16-inch drill

Caution

bit, or M3 with 8-mm drill bit) to secure the screws. If the screws are not properly anchored, the strain

of the network cable connections could pull the voice gateway from the wall.

For hollow-wall mounting, use two wall anchors with washers. Wall anchors and washers must be size

Note

number 10.

Desktop-Mounting the Chassis

To set the Cisco VG202 or Cisco VG204 voice gateway on a desktop, follow these steps:

Place the four rubber feet (from the accessory kit) in the four indentations on the underside of the chassis.

Step 1

This helps provide proper airflow through and around the chassis.

Do not place anything on top of the chassis that weighs more than 10 lb (4.5 kg). Excessive weight on

Caution

top can damage the chassis.

Step 2

Place the Cisco VG202 or Cisco VG204 voice gateway on a smooth, flat surface.

You must connect the chassis to a reliable earth ground; the ground wire must be installed in accordance

with local electrical safety standards.

•

OL-15959-01

Two number-six, 3/4-in. screws

Cisco VG202 or VG204 voice gateway

Maximum distance between the voice

gateway and the power supply (6 ft [1.8 m])

Distance between the screw and the wall

(5/32 in. [0.40 cm])

For NEC-compliant grounding, use size AWG 14 (2 mm2) or larger wire and an appropriate

user-supplied ring terminal.

For EN/IEC 60950-compliant grounding, use size AWG 18 (1 mm2) or larger wire and an

appropriate user-supplied ring terminal.

Distance between the two screws (5 7/16 in.

[13.8 cm])

Mounting-screw slots

Horizontal surface on which to place the

power supply

Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide

3-7