Epson RX680 - Stylus Photo Color Inkjet Manual rápido - Página 40

Procurar online ou descarregar pdf Manual rápido para Scanner Epson RX680 - Stylus Photo Color Inkjet. Epson RX680 - Stylus Photo Color Inkjet 48 páginas. Ultra hi-definition photo all-in-one
Também para Epson RX680 - Stylus Photo Color Inkjet: Ficha de especificações (2 páginas), Resumo técnico (11 páginas), Manual Iniciar aqui (8 páginas), Atualização (1 páginas), Informações importantes (3 páginas), Manual Iniciar aqui (8 páginas)

Epson RX680 - Stylus Photo Color Inkjet Manual rápido
3. If you see paper jammed in the lower rear area or in the auto duplexer,
slowly pull it out.
If you see a message that paper is jammed in the bottom of the all-in-one, see
your on-screen User's Guide for instructions on clearing the jam.

Print Quality Problems

Make sure the document is placed flat against the document table glass and
the all-in-one is not tilted or placed on an uneven surface.
In the rear sheet feeder, load the paper printable side face-up. In the front
paper cassette, load paper with the printable side face-down.
Make sure your paper isn't damp or curled.
Use a support sheet with special paper or load your paper one sheet at a time.
Remove sheets from the output tray so not too many collect at a time.
Make sure the type of paper you loaded matches the paper size and type
settings on the control panel (see page 13) and in your software (see page 28).
For the best print quality, use Epson special paper (see page 10) and genuine
Epson ink cartridges (see page 35).
If you notice light or dark bands across your printouts or they are too faint,
you may need to clean the print head to unclog the nozzles. Run a nozzle
check (see page 31) to see if the print head needs cleaning.
Clean the print head (see page 32).
If you notice jagged vertical lines, you may need to align the print head. See
the on-screen User's Guide for instructions.
The ink cartridges may be low on ink (see page 35 for instructions on
replacing an ink cartridge).
If a dotted line appears in the image, clean the scanner glass with a soft, dry,
lint-free cloth (paper towels are not recommended), or use a small amount of
glass cleaner on a soft cloth. Do not spray glass cleaner directly on the glass.
40
Solving Problems