Motorola MBP331-3 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Monitor de bebé Motorola MBP331-3. Motorola MBP331-3 31 páginas. Digital video baby monitor
Também para Motorola MBP331-3: Manual de início rápido (8 páginas)

Imprimir página

2.3

Parent Unit Power Supply

IMPORTANT

Installing the rechargeable battery pack and charging it fully before use is

recommended, to allow temporary operation of the parent unit in the event of

a power failure or if the parent unit is moved.

1. Connect the small plug of the power adapter to the parent unit and the

other end to a suitable mains socket. Only use the enclosed power adapter

(6V DC / 500mA) with the slightly smaller DC plug.

2. Press and hold the

unit.

3. Once the baby and parent units are switched on, the display on the parent

unit will show the video captured by the baby unit.

4. If there is no connection or you are out of range, the video display will

change to the Motorola screen with a flashing

beep about every 10 seconds. Move the parent unit closer to the baby unit

until the link is re-established.

5. Press and hold the

unit.

NOTE

The battery icon

unit emits a beep about every 10 seconds to indicate that the battery is low and

needs to be recharged. The battery pack takes about 16 hours to charge fully.

POWER ON/OFF button to turn ON the parent

POWER ON/OFF button to turn OFF the parent

turns RED, the Power Indicator LED flashes RED and the

icon and the unit will

Getting Started