ARGtek Power King Station Manual de instalação rápida - Página 3

Procurar online ou descarregar pdf Manual de instalação rápida para Router de rede ARGtek Power King Station. ARGtek Power King Station 13 páginas. Wlan outdoor cpe for 2.4ghz
Também para ARGtek Power King Station: Manual de instalação rápida (16 páginas)

Imprimir página

C. PoE connection

1. Connect (POE) RJ45 Jack to CPE RJ45 Jack with good quality Ethernet cable.

2. Connect (LAN) Jack to PC or Switch Hub LAN port.

3. Plug the AC power cordially

D. CPE Connection

1. Open the CPE enclosure you will find two RJ45 Jacks two LEDs and one reset button.

2. Connect the PoE cable to either LAN or WAN port.

3. To reset the CPE just press and hold the reset button for about 10 seconds and wait for

55 seconds to reboot the CPE.

Notice:

This CPE default operation mode is in Bridge mode. Both LAN and WAN ports are in the

same switch hub. Please go to the webpage and change the operation mode to Gateway

mode when you are going to use the WAN port for your CPE.

ARGtek Communication Inc.

E-Mail:[email protected] Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742