Motorola GM1200E Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Rádio Motorola GM1200E. Motorola GM1200E 22 páginas. Dealer programming software dps
Também para Motorola GM1200E: Manual de instalação (8 páginas), Manual de instalação (36 páginas)

Imprimir página
Making a Call
For example:
JOHN SMITH
or
213
or
GROUP XX
where XX indicates position in Fixed Group list.
or
BA SERVICE
where BA SERVICE is a Dynamic Group alpha alias.
or
DYNAMIC XX
where XX indicates position in Dynamic Group list.
The call request is sent either by pressing the PTT
key (18) or
.
#
6
Making a Call/Fixed and Dynamic Groups
English
213
NAME UNKNOWN
NUMBER
DYNAMIC XX
NAME UNKNOWN
If the Up/Down Scroll buttons (8) are operated for
short form dialling, but no call request is sent, the
display will be held until tone H sounds. The display
will then revert to the IDLE STATE.
When the shortform dial number is displayed, it may
be edited as described in the Keypad Edit section.

Fixed and Dynamic Groups

A fixed group is a group of users, the address
(number) of which is pre-programmed into your
radio by your dealer.
A dynamic group is a group of users, the address
(number) of which is sent to your radio 'over air' at
any time via the system controller. Therefore at any
time you may become a member of a dynamic
group, able to receive calls and (depending on how
your radio is programmed) send calls to that group.
Incoming calls to fixed and dynamic group numbers
are detailed in Receiving a Call and displayed
under Call Progress - Receiving.
To make an outgoing call to a fixed or dynamic
group address, use the Up/Down Scroll buttons (8)
when the radio is in the IDLE STATE as detailed in
Shortform Dialling.