Motorola im240 - Wireless PC Card Modem Manual do utilizador - Página 20

Procurar online ou descarregar pdf Manual do utilizador para Modem Motorola im240 - Wireless PC Card Modem. Motorola im240 - Wireless PC Card Modem 43 páginas. Motorola wireless modem user's guide

Imprimir página

Using the Modem

Note: If you are installing using ActiveSync, the host PC must have:

• A CD-ROM drive

• ActiveSync version 3.1 or higher

Microsoft ActiveSync must indicate that the connection has been

established.

2 Insert the im240 Wireless Modem Installation and Application

Software CD-ROM in your CD-ROM or DVD drive.

3 If the im240 Wireless Modem and Installation and Application

Software installation program does not start automatically, select

Start, Run, and then type d:\setup.exe, where d refers to the letter

of your CD-ROM or DVD drive.

4 Use the Next and Back buttons to navigate through the Wizard.

Using the default settings for the Destination Location and Program

Folder is recommended unless you have special requirements and

an advanced understanding of PC configuration.

5 When prompted, select Pocket PC. Click Next.

6 When prompted, insert your im240 Wireless Modem into the

available PCMCIA Type II slot.

Note: Some Pocket PC's may not be compatible with a PCMCIA

Type II adapter. Check with your Pocket PC manufacturer.

7 To start the im240 Wireless Modem Dashboard Application, click

the im240 Wireless Modem icon on your programs desktop.

Using the Modem

Before using the im240 Wireless Modem, you must insert it into your

laptop's PCMCIA slot or connect it to your Pocket PC's PCMCIA slot, if

available. Then connect the detachable antenna or external antenna.

You must register the im240 Wireless Modem with your service

providers' network before you use it. Your im240 Wireless Modem

registers automatically when turned on.

Note: The initial registration may take an extended amount of time

to complete. The im240 Wireless Modem will need to retrieve

configuration data from the system.

The Dashboard displays the status of the modem, Powering On,

Seeking Signal, Registering, and Dialing to Network