Toshiba 22EL833B Digital Series Manual do Proprietário - Página 11

Procurar online ou descarregar pdf Manual do Proprietário para TV Toshiba 22EL833B Digital Series. Toshiba 22EL833B Digital Series 44 páginas. Digital series

Imprimir página

Connecting an HDMI® or DVI Device to the HDMI Input

The HDMI input on your television receives digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital

form from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI ter-

minal. For proper operation, it is recommended that you use

an HDMI cable with the HDMI Logo (

• If your HDMI connection is capable of 1080p and/or

your television is capable of refresh rates greater than 50Hz,

you will need a Category 2 cable. Conventional HDMI/DVI

cable may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• To view the HDMI device video, press the

select HDMI1 or HDMI2.

A01_MB60_[GB]_(IB_INTERNET)_DVB-TC_(CT90326)_10071224_10071226.indd 10

To Connect a DVI Device

Connect an HDMI-to-DVI adaptor cable (HDMI type A con-

nector) to the HDMI terminal and audio cables to the SIDE

AV socket, using the supplied SIDE AV connection cable's

RED and WHITE inputs (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

•

An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

button to

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

television ﬁ rst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device ﬁ rst, and then the television.

- 10 -

02.06.2011 20:56:00