Pioneer A-10-K Manual de Instruções - Página 11

Procurar online ou descarregar pdf Manual de Instruções para Amplificador Pioneer A-10-K. Pioneer A-10-K 13 páginas.
Também para Pioneer A-10-K: Manual de Instruções (12 páginas)

Imprimir página

Operation

Making an audio recording

You can make an audio recording from any audio source connected to the amplifier.

SACD/CD player

Network audio player

/I STANDBY/ON

STANDBY

PURE AUDIO

Hi-Bit 32

iPod/USB

2.1A

Audio recording component

(CD recorder, tape deck, etc.)

Select the source you want to record.

SACD/CD NETWORK

PHONO

TUNER

AUX

Start recording, then start playback of

the source component.

iPod dock, etc

Turntable

iPod

Music>

Extras>

Settings>

Shuffle Songs

Backlight

Tuner

NETWORK AUDIO PLAYER

N-50





FUNCTION











Playback

Recording

To set for automatic standby status (Auto Power Down)

When this condition is set, if no input signal is detected for 30 minutes, the unit will automatically enter standby

status.

If the unit's power is ON, hold the unit's front-panel DIRECT button and LOUDNESS

button depressed simultaneously for three seconds.

When this condition is set to ON, the STANDBY/APD indicator on the unit's front panel will light green. Press the

buttons again to disable the setting.

• This condition can also be set by means of the APD button on the A-30's remote control.

• The factory default setting is ON.

Note

• Depending on the device connected, excessive noise produced by the device may be interpreted as an audio

signal, thus preventing the Automatic Power-Down function from operating.

Restoring all the settings to the factory default settings

When power is in standby mode, hold the front-panel's DIRECT button and

SPEAKERS A button depressed simultaneously for five seconds.

Turn power ON to the unit.