Pioneer A-302 Manual de Instruções - Página 3

Procurar online ou descarregar pdf Manual de Instruções para Amplificador Pioneer A-302. Pioneer A-302 13 páginas.

Imprimir página

PANEL FACILITIES

[FRONT PANEL]

The illustration shows model A-402.

Model A-302 is not equipped with @ and @.

@ POWER switch/indicator

Press to turn power to the unit on and off.

When the power is on, the indicator lights.

@ ACTIVE TONE CONTROL

Ordinarily, the more the volume control is turned down, the more

obvious the loudness characteristics become. Since the effects of

this unit's tone control settings are increasingly emphasized as the

volume is turned down, you can obtain the same kind of effect as

loudness characteristics by using suitable tone control settings.

TREBLE tone control

Use to adjust the high-frequency tone at low volume

level. The

center position is the flat (normal) position. When turned to the right,

high-frequency tones are emphasized; when turned to the left, high-

frequency tones are de-emphasized.

NOTE:

position.

® At volume levels below the 10 o'clock position, the set tone control

effect is obtained.

At volume levels above the 10 o'clock position, the effect becomes

increasingly weaker.

BASS tone control

Use to adjust the low-frequency tone atlow volume level. The center

position is the flat (normal) position. When turned to the right, low-

frequency tones are emphasized;

when

turned to the left, low-

frequency tones are de-emphasized.

NOTE:

¢ This control does not operate when DIRECT switch is in the on

position.

@ At volume levels below the 10 o'clock position, the set tone control

effect is obtained.

At volume levels above the 10 o'clock position, the effect becomes

increasingly weaker.

@ REC SELECTOR switch

When this switch is set to a position other than SOURCE or OFF, the

equipment

selected

by REC SELECTOR

switch can be recorded

from, irrespective of the settings of INPUT SELECTOR and DIRECT

switches.

TUNER:

To record from the equipment connected to TUNER terminals.

CD:

To record from the equipment connected to CD terminals.

OFF:

In this position, nothing from REC terminals of TAPE 1/DAT and TAPE 2

is output. Set to this position when not recording; the cassette deck will

be disconnected, improving sound quality.

SOURCE:

To record from the equipment selected by INPUT SELECTOR switch.

TAPE:

To record (copy) from the cassette deck of TAPE 1/DAT terminals, to

the cassette deck of TAPE 2 terminals.

To record (copy) from the cassette deck of TAPE 2 terminals, to the

cassette deck of TAPE 1/DAT terminals.