Xerox Majestik 5765 Manual de referência - Página 20

Procurar online ou descarregar pdf Manual de referência para Copiadora Xerox Majestik 5765. Xerox Majestik 5765 44 páginas. Majestik color series digital color copier / printer
Também para Xerox Majestik 5765: Manual suplementar (1 páginas), Manual de referência (7 páginas), Manual de referência (7 páginas), Manual de referência (18 páginas), Especificações (7 páginas)

USAGE GUIDELINES

Preprinted Papers

Material Description & Expectations

This category encompasses a wide variety of materials. Offset

printed Letterhead papers and Xerographic Prints, within the

recommended paper weight range, will feed reliably in the 5760/

5765. Copies produced on laser, ink jet, or dot matrix printers,

carbonless paper, raised/engraved copies, and preprinted forms,

using various inks (with and without MICR), have not been tested

and should be considered in the not recommended category.

Recommended Materials

Offset printed Letterhead and Xerographic Prints from 16 lb

bond (60 gsm) to 90 lb index (163 gsm).

1 2 3. . .

Steps for Success

1 Ensure paper is within the 5760/5765's paper weight range.

2 For best feeding performance, run all preprinted sheets from the

Paper Tray Bypass. If paper is heavier than 28 lb bond (105

gsm), run it in the Heavy Paper Mode.

3 Allow preprinted sheets to dry completely before loading them

into the copier/printer.

4 The preprinted ink should have a low conductivity and will have to

withstand the high fuser temperature of the 5760/5765 (155° C/

310° F).

5 Keep the preprinted sheets free from curl. Ensure that sheets are

flat or have a slight lead edge downcurl when loaded into the

bypass paper tray.

6 To minimize jams, store preprinted sheets carefully. Avoid

damaging the edges or corners of the paper and protect

preprinted sheets from humid conditions that will lead to image

quality problems.

Hints, Tips & Testing Results

Xerox testing has shown the following:

•

Some inks from preprinted materials may cause deletions,

offsetting or contamination. Select a surface-drying , laser-

compatible ink designed for reproduction on color copier/

printers. An example is TuffText by Vanson. Your offset printer

representative may be able to specify an ink with similar

characteristics.

•

Two-sided copying/printing onto preprinted materials is not

recommended. In many cases, deletions will occur if you

MAJESTIK 5760/5765 MATERIALS USAGE GUIDE