Yamaha C-5000 Manual do Proprietário - Página 22

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Yamaha C-5000. Yamaha C-5000 44 páginas.

Connecting a turntable

Connect your turntable to the PHONO jacks on this unit.

The unit provides XLR-type balanced jacks and RCA-

type unbalanced input jacks.

Balanced connection

Turntable

OUTPUT

（BALANCE）

Unbalanced connection

Turntable

OUTPUT

Note

If you connect the turntable to the RCA jacks on this unit,

listen to and compare the sound with the SIGNAL GND

(ground) terminal connected and unconnected, and then

select whichever less noisy .

NOTICE

Do not use balanced and unbalanced connections between

this unit and the turntable simultaneously . Doing so would

create a ground loop that could generate static and noise .

Connecting a recording

component

You can connect a recording device, such as a hard disk

recorder to the unit, and record audio input from the unit.

Connect the recording component to both LINE 2 IN

jacks and LINE 2 OUT (recording) jacks.

Note

• Make sure that you connect the LINE 2 IN jacks and LINE

2 OUT (recording) jacks to the same component .

• The signal from the LINE 2 OUT (recording) jacks is

essentially identical to the signal from the output jacks

specified by the OUTPUT selector . If the INPUT selector is

set to LINE 2, no signal will be output at the LINE 2 OUT

(recording) jacks .

Hard disk recorder,

etc

OUTPUT

INPUT