Zanussi ZSFN132W1 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar loiça Zanussi ZSFN132W1. Zanussi ZSFN132W1 25 páginas.
Imprimir página
1)2)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-
tity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
INFORMATION FOR TEST INSTITUTES
To receive the necessary information for conducting performance tests (e.g. according to: BS EN60436 ),
send an email to:
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided with your appliance.
SETTINGS
PROGRAMME SELECTION MODE AND
USER MODE
When the appliance is in programme selection
mode, you can set a programme and enter user
mode.
Settings available in the user mode:
•
The level of water softener according to the
water hardness.
•
Activation or deactivation of the rinse aid empty
notification.
•
The level of rinse aid according to the required
dosage.
•
Activation or deactivation of the AirDry.
The saved settings remain valid until you
change them again.
How to set the programme selection mode
The appliance is in programme selection mode
when the on/off indicator is on and
flashes.
Water hardness
German degrees
French degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
8
Water
(l)
3.8
indicator
mmol/l
(°fH)
84 - 90
8.4 - 9.0
76 - 83
7.6 - 8.3
65 - 75
6.5 - 7.5
51 - 64
5.1 - 6.4
Energy
(kWh)
0.014
After activation, the appliance is in programme
selection mode by default. If not, set the
programme selection mode the following way:
Press and hold
until the appliance is in
programme selection mode.
THE WATER SOFTENER
The water softener removes minerals from the water
supply, which would have a negative effect on the
washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. Set the right level of the
water softener to assure good washing results.
Clarke de-
mg/l (ppm)
grees
835 - 904
58 - 63
755 - 834
53 - 57
645 - 754
46 - 52
505 - 644
36 - 45
Duration
(min)
15
Water softener level
10
9
8
7