Alecto WS-4800 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Estação meteorológica Alecto WS-4800. Alecto WS-4800 16 páginas. Weather station with wireless outdoor sensor
Também para Alecto WS-4800: Manual do utilizador (17 páginas)

Imprimir página
Alecto WS-4800 Manual do utilizador

4.5 Barometer (air pressure):

If this window is not visible, please first press the button
1
4
*5: An absolute air pressure indicates the air pressure which is present independent from the height on
which you're measuring the air pressure. A relative air pressure is the air pressure corrected for the
height on which you're measuring the air pressure. For a correct weather forecast the relative air
pressure is required.
You can set the desired unit as follows:
1. press and hold the
2. use / to select your desired unit
3. briefly press the
Chapter 8 explains how you can change the relative air pressure display in case you're using the
weather station on a much higher level than mean sea level.
*6: In the Benelux one uses the hectoPascal notation. Before, the air pressure was sometimes also
expressed in bar; 1 mbar equals 1 hPa.
You may switch between these notations by briefly pressing the

4.6 Rain:

If this window is not visible, please first press the
6
5
4
3
*7: You can set the desired unit as follows:
1. press and hold the
2 seconds
2. use / to select your desired unit
3. briefly press the
button for 2 seconds
button (if the air pressure now starts flashing, press the
button for
button
2
1.
actual air pressure
2.
indicates whether the relative or
3
absolute (*5) air pressure is displayed
3.
indicates whether the air pressure
is shown in hPa (hecto Pascals), in
inHg (inches of mercury) or in mmHg
(millimetres of mercury) (*6)
4+5. this shows the trend of the air pressure
over the last 24 hours
5
button
1.
amount of rainfall
1
2.
indicates how much rain has fallen in in
(inches) or in mm (millimetres) (*7)
2
3+4. this shows the trend of the rainfall over
the past 5 days
5.
indicates over which period rainfall is
measured (*8)
6.
illuminates when the max rain alert is set
*8: blank = rainfall of the past hour
(this is updated every 6 minutes and displayed the
rainfall of the last 60 minutes.
DAILY = rainfall of today, calculated from midnight.
WEEKLY = rainfall from the beginning of the week
(Monday)
MONTHLY = rainfall of this month
You can switch between these indications by briefly
pressing the
button.
10
button again)
button.