Acoustic B10 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Acoustic B10. Acoustic B10 12 páginas. 10 watt bass guitar amp

pANEL CoNFIGURAtIoN

fRonT PAnEl

Bass input - 1/4" bass guitar input.

Volume level control. If you are using a bass guitar with an on-board preamp, set its level to mid

position before increasing this control otherwise distortion may occur.

Low frequency control set to boost (14 dB) or cut (-14 dB) frequencies at 60 Hz. Controls the

lowest fundamental frequencies to enhance warmth and provide deep, full tones.

Midrange frequency control set to boost (12 dB) or cut (-12 dB) frequencies at 340 Hz. Allows

you to add thickness and body to your bass tones.

High frequency control set to boost (10 dB) or cut (-10 dB) frequencies at 2 kHz. Increasing this

will add punch to your bass guitar's sound.

Aux in - This 1/8" input jack will allow you to plug in a CD or MP3 player or any other source

so you can practice along. To control the source volume, adjust the output volume of the

device. We suggest you turn the volume all the way down, then plug in and adjust the volume

according to your taste.

Headphone jack -1/8" jack for plugging in headphones. When used, it will disconnect the

internal speaker.

On / Off light - When this jewel light is lit, your amp is on and ready to be played.

Power switch - Turns amp on and off.

w w w . a c o u s t i c a m p l i f i c a t i o n . c o m

AUX