Acoustic Energy Aegis Evo One Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Acoustic Energy Aegis Evo One. Acoustic Energy Aegis Evo One 5 páginas. Aegis evo series;

Imprimir página

Aegis Evo Three

Please unpack your AEGIS EVO THREE carefully on a carpet or similar surface.

Locate the plinths and fittings and, having carefully inverted the speaker, screw

the plinth to the base of the cabinet using the screws and pilot holes provided.

Please ensure that you have firmly screwed the plinth to the cabinet, failure to

do this will degrade performance.

There is a mass-loading compartment at the bottom of the cabinet.

You may choose to fill it with washed, fully dried non salt contaminated sand,

or suitable metal chips, via the hole at the back. A plastic bung is provided to

seal the cabinet. Mass loading will significantly improve the performance of

the speaker. If you decide not to mass-load the speakers, we still recommend

fitting the plastic bung to avoid unwanted resonance. Be aware that the

plastic bung has not been designed to be removable after insertion. You may

wish to use a temporary removable plug until you have made your decision

High tensile 8mm floor spikes and lock nuts are provided for use with the

plinth. This guarantees optimum coupling to the floor particularly in rooms

fitted with carpet. The spikes penetrate the carpet and couple the speaker

firmly to the floor structure below. The spikes (with lock nut screwed down to

the knurled part of the spike) should be fitted to the threaded insert in the

underside of the plinth while the speaker is still inverted. The speaker is now

ready for installation.. Any final adjustment of spikes to eliminate cabinet

wobble can now be made using a spirit level if required. The lock nuts should

be firmly tightened when the final adjustments to cabinet position and

alignment have been made and there is no rocking.

Closeness to room boundaries has a major impact on the low frequency

performance. The speakers should be kept away from corners (which will

produce bass booming) and they should be 0.6 m from the back walls, and a

greater distance e.g. 1m from the side walls.

Aegis Evo Centre

Position the AEGIS EVO CENTRE either immediately above or below the

television screen, whichever places the speaker nearest ear level when listening.

Line the front of the speaker approximately in line with the plane of the screen.

Fix the four self-adhesive foam-rubber feet to the base of the speaker to protect

both the surface on which the speaker stands and the underside of the speaker.

The feet also absorb vibration, which is especially important if placing the

speaker directly onto a thin television cabinet. If placement is on top of the

television, be aware that the flat surface depth may be limited, so ensure the

feet are placed accordingly.

When fine-tuning the Aegis EVO system, adjust the levels of the left, centre and

right channel speakers to give an even movement as sound images pan across

the screen. Most Home Theatre systems also include calibration sounds to help

set the right balance for the three front channels. The EVO Centre may also be

used as high powered surround channel speakers, mounted vertically, since

their particular 'vocal precision' tuning also suits them for boundary placement

on a wall.

Check that your amplifier is switched off before installing your loudspeakers. Failure

to do so may result in speaker or amplifier damage if the amplifier is energised and

delivering any power. The diagrams illustrate the connection for one loudspeaker

only.

Positioning