Dixon Bayco Instruções de manutenção e funcionamento - Página 3

Procurar online ou descarregar pdf Instruções de manutenção e funcionamento para Equipamento industrial Dixon Bayco. Dixon Bayco 4 páginas. Locking handle kit
Também para Dixon Bayco: Instruções de instalação (5 páginas), Instruções de manutenção e funcionamento (4 páginas), Instruções de manutenção e funcionamento (10 páginas)

These instructions and recommendations are provided to ensure proper operation and long service

life of Dixon VR4040CS-AL. Parts are identified by the item numbers on the assembly drawing and

parts list.

DIASSEMBLING AND ASSEMBLING INSTRUCTIONS FOR "DIXON" VR4040CS-AL SERIES

VAPOR COUPLERS

1. Hold the cage (2) and undo the machine screws (6) & lock washers (14).

2. Remove the cage (2) and visually inspect the cage (2) and the button (11). If the cage (2) and

the button (11) are worn or damaged, replace with new ones.

Note!

The button (11) is tightened onto the probe of the cage (2) through the screw (13) in the

factory.

3. If the gasket (4) needs to be replaced, install the new gasket (4). Make sure that the gasket (4)

sits in the groove properly.

4. Push the poppet (3) into the coupler and hold. Remove the O-Ring (8) from the poppet (3).

Note! After the O-Ring (8) is removed, the poppet stop (12) will hold the poppet (3) in the coupler

body. If the poppet (3) is worn or damaged, remove the coupler from the hose or the mating part.

5. Remove the poppet stop (12) from the hose shank end using a wrench for 1" hex.

090121 Rev 6