Acoustical Systems AXIOM Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios Acoustical Systems AXIOM. Acoustical Systems AXIOM 16 páginas.

For any MM-cartridge or any other cartridge

with compliance greater than 13x10(-6) dyne:

- please select the steel trim weight.

For any cartridge with compliance of 9 to

13x10(-6) dyne:

- please select the gun metal / brass trim

weight.

For any cartridge with compliance of less than

9x10(-6) dyne:

- please select the tungsten trim weight.

stainless steel

brass

Place the selected trim weight in the POM-

block on the lower end of the main counter

weight.

Lock it in place with the left end (pointing to-

wards the AXIOM's bearing) barely visible out-

side the POM block and the right end extending

towards the rear by almost half of the length.

The main counter weight has a flattened side.

This side has to point inward - towards the

main assembly of the AXIOM.

Now take the complete main counterweight

and slide it onto the shaft at the rear end of the

AXIOM.

Leave enough room on the rear of the shaft to

accommodate the lateral weight set.

Lightly tighten the set screw in the tungsten

main counterweight.

Now do take the stainless steel (or the tungsten

set with SME-version of AXIOM) set of lateral

weights.

tungsten

One of the 2 cylinders features an Allen screw.

Undo this screw and slide the cylinder off the 4

mm shaft. This 4mm shaft is firmly attached to

the other cylinder. Take the shaft with cylinder

and insert it through the horizontal hole at the

end of the shaft carrying the counter balance

weight.

Please do insert it with the fixed cylinder -

which is firmly attached to the shaft - pointing

outwards, away from the turntable platter and

the AXIOM's main assembly. Now do move the

cylinder as close as possible to the main shaft.