Altron AL-761-N Manual de instruções - Página 15

Procurar online ou descarregar pdf Manual de instruções para Equipamento industrial Altron AL-761-N. Altron AL-761-N 19 páginas.

liquid with a small amount of tap water to dilute the salt concentration.

In order to remove water out from the unit:

Connect water pulling hose to the cleaning liquid inlet.

Inside water of the unit will draw out from water pulling hose.

In this operation, please open both the alkaline hose and acidity hose.

Press small nail on the cleaning liquid inlet for detaching the tube.

HOW TO CONNECT THE FLOAT SWITCH OR REMOTE SWITCH OPTION:

※ Use the float switch with the point of contact.

When fill the tank--- open, When empty the tank---open ※

Use the remote switch with momentary type.

Warning:

When connecting the switch, make sure the power switch is OFF.

Do not pour water inside of the unit.

1. Remove six screws of rear panel and remove the rear panel.

2. Lead the electric wire of switch into the grommet.(Please slash center of the

grommet with knife.)

3. Connect the float switch harness

Terminal board (Center)

Terminal board (Right side) ---- detects the empty signal

4. Connect the remote switch harness

Terminal board (Left side)

---- detects the full signal

---- detect signal of remote