Artis BE810M Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Auscultadores Artis BE810M. Artis BE810M 2 páginas. Bt earbuds
Imprimir página
Pairing Mode:
• Long press the Multifunction key until the red light and blue light blink in turn,
and the headset will make an audio prompt.
• Please keep the distance between the BT headset and a mobile
phone (or other devices to connect) within 1m, the closer, the better.
• Turn on the headset, and confirm that it has entered the pairing mode with the
red light and blue light blinking in turn.
• Enable the BT search function of the mobile phone or other devices to
connect, and the mobile phone will display "TWS Ear buds" Found.
• Select "TWS Ear buds" (For some mobile phones, you need entering "0000" as
the pairing password), and the BT headset will automatically connect
with the mobile phone, with the blue light blinking.
Turning Off:
• Long press the Multifunction key until the red light is on and then off, and the
headset will make an audio prompt.
2. Using the Left and Right Headsets at the Same Time.
BT Pairing Steps:
• Long press the right headset key to turn it on, until the LED red light changes to
red and blue light blinking at the same time (now, the right headset will be the
main headset as it was first turned on, and the left headset will be the auxiliary
headset as it was turned on later than the right headset, and vice versa).
• Press the left headset key to turn it on, until the LED shows red light, and now
the left headset will automatically connect to the right headset, and the red
light of the left headset will change to blue light after successful connection.
• Turn on the mobile phone BT, search BT headset named "TWS Ear buds" , and
touch the name to establish connection. The "Connected" word will show
behind the BT headset name and the mobile phone screen will show the
headset battery status if the connection is established. Now, the LED light on
both headsets will blink blue light at the same time, meaning both headsets are
successfully connected to the mobile phone.
• You can listen to music in the mobile phone music library after the successful
connection. The headset volume needs to be adjusted via the mobile phone
(the headset blue LED light will blink once every 5s).
Attention:
• The maximum pairing time of the BT headset is 120s. If the light is off, it means
that the BT pairing status has stopped, and if you still fail to pair them, please
repeat the above steps to pair them again, or delete the previous connection
name on your phone (if have), try the other side to be the main headset.
Operation Instructions:
• To disconnect the headset and mobile phone BT, please use any one of the
following methods:
• Turn off the mobile phone BT
• Long press the headset Multifunction key until the red light is off, and the
• headset will automatically power off.
• Move the headset to a place 20m (about 60 feet) or farther away from the
mobile phone.
Reconnect the paired headset and mobile phone:
1. Please keep the distance between the BT headset and the mobile phone (or
other devices to connect) within lm, the closer, the better.
2. Turn on the headset, and it will enter the reconnecting mode with the blue light
blinking.
3. Enable the BT search function of the mobile phone or other devices to connect,
and the BT headset will automatically reconnect to the mobile phone
connected last time.
Answering a Call:
• Press the Multifunction key to answer it when there is a call and you hear the
sound prompt made by the headset, or answer it with your mobile phone.
Rejecting a Call:
• Continuously press the Multifunction key for twice to reject it when there is a
call and you hear the sound prompt made by the headset or reject it with your
mobile phone.
Hanging Up:
• Press the headset Multifunction key to hang up during a conversation, or hang
up with the mobile phone hang-up button.
Music / Music playback:
• Press the Multifunction key to play or pause the music.
Continuously press the Multifunction key twice to switch to next track.
Prompting Language
• Default: English
FAQ's:
1. BE810M Headset cannot be turned on.
A: Please check the battery status of the headset.
2. Can the battery of BE810M Headset be replaced?
A: No. The headset uses the lithium polymer battery that is non-removable.
3. Can BE810M Headset be used while driving?
A: The communication Ear Buds can be used while driving, but it is not
recommended to use the headsets while driving.
4. BE810M headset disconnects with the mobile phone within 10m.
A: Please check if there is any metal or other object within the connection
range that affects the connection, as BT is a wireless technology that is
sensitive to the objects between the headset and the connected device.
5. No sound is heard after the headset is connected to a computer or mobile
phone.
A: Please check if the computer output channel has been set to BT audio device
and if the computer BT supports A2DP; also check the volume of the
computer/mobile phone.
6. Can the headset be used to control App's on the mobile phone after the
headset and mobile phone are connected?
A: The device APP settings may be varied, which makes functions of some
App's uncontrollable by the headset
Special Tips:
If the headset BT fails to successfully connect to the mobile phone BT, the
reasons may be;
1. The product was not successfully paired in the factory: if one headset shows
red and blue light and the other shows red light after they are normally turned
on, both headsets will not be successfully connected to the mobile phone
BT.
2. In the case that the product was paired successfully in the factory: pairing of
the two headsets may be disconnected due to operation mistake of the user
Both headsets will also not be successfully connected to the mobile phone if
they both show red light.
• If the above problems happen to the product: delete the paired BT
device on the mobile phone, turn off the left and right headsets, and then turn
on both headsets at the same time by long pressing them for above 8s; both
headsets will search and pair with each other (with red light and blue light
blinking in turn), and LED lights of both headsets will change to blue
after having searched each other, meaning successfully pairing with each
other; then you can pair the BT according to the above steps.
Technical Specifications:
• Real wireless stereo, left and right channels separated, HIFI quality
• Both the left and right headsets possess complete BT headset functions, and
can be used alone or in pair.
• Compliant with BT V4.2+BR+EDR+BLE specification
• BT frequency range: 2.4GHZ