Artison RCC 1000 Series Manual de instalação - Página 9

Procurar online ou descarregar pdf Manual de instalação para Amplificador Artison RCC 1000 Series. Artison RCC 1000 Series 12 páginas.

comes from the factory set at 0°. Adjust the phase, listening for an increase in mid bass in the

crossover region. A pink-noise generator or an RTA (Real-time Analyzer) can further analyze

your installation.

3. VOLUME – The position of this knob controls the overall gain (volume) of the subwoofer.

SETUP

1. SUBWOOFER SERIES– Select the appropriate setting based on which subwoofer module you

have:

RCC320

– Use this mode for the RCC320-R or RCC320-PC. Up to 2 Modules, connect 2

modules in parallel either at amplifier or externally.

RCC640

– Use this mode for the RCC640-R or RCC640-PC. Up to 1 Module.

2. POWER MODE – Select either:

AUTO – On with Signal Sense, without signal it will stay on for ≈15 minutes. NOTE: The front

panel button will not be operable in this mode.

ON – Always On. NOTE: The front panel button is operates Standby function.

TRIGGER – On with a 12 Volt Trigger. NOTE: The front panel button will not be operable in

this mode.

3. LPF SLOPE – Select either:

12 dB/Octave – Acoustic Suspension (Sealed) Artison Front Channels

24 dB/Octave – Bass Reflex (Ported) Artison Front Channels