AluTeam BR 248-2 Manual de instruções de montagem - Página 11
Procurar online ou descarregar pdf Manual de instruções de montagem para Camiões AluTeam BR 248-2. AluTeam BR 248-2 12 páginas. Box body kits
Imprimir página
5. Maintenance, Service
6. Disposal of Old Box Bodies and Components
Series 248-2 Assembly Instructions
5.1 Maintenance
Visually inspect body screws with sealing washer regularly. If neces-
sary, replace seals ( e.g. which swell out ) and screws. At the same time,
check the specified torque.
•
Locks and lock cylinders are maintenance parts. Lubricate them to
keep them in working order if necessary. Frozen locks due to lack of
maintenance are not a reason for complaint.
•
To clean the body with the steam jet cleaner, follow the correspond-
ing instructions in 4. Finishing work.
•
Check all seals regularly and always treat with a rubber care product
after cleaning.
5.2 Service
If you have any questions regarding the assembly, please contact our
customer
service:
Tel.: +49 (0)521-41 73 11-30, Email: [email protected]
If you require
spare parts,
sentative or call us on: +49 (0)521 - 41 73 11 - 10.
Please send emails to: [email protected]
You can remove the metallic outer layers from the foam core and,
•
like the aluminium sections, hand them over to the scrap trade for
recycling. The same applies to the steel and / or stainless steel com-
ponents of the frames.
A PUR foam core can be incinerated in thermal waste treatment
•
plants without polluting the environment. Plywood, like particle-
boards, can be burned in wood-fired furnaces with at least 50 kW
nominal heat output. They are subject to stricter carbon monoxide
limits than solid wood. These values are mostly only achieved by
automatically loaded plants. Odour nuisance due to the ammonium
additives in the binders must be avoided.
GRP must be processed by a recycling/recovery company, and is used
•
as a substitute fuel. For energy recovery in a cement works, the EWC
code is 070213 (waste plastic).
For information on disposing of the foam in the area of the floor,
•
contact the trade association for extruded polystyrene foam (in Ger-
many: Fachvereinigung Polystyrol-Extruderschaumstoff (FPX), Od-
enwaldring 68, 64380 Rossdorf (https://xps-spezialdaemmstoff.de/
wpcontent/uploads/XPS-mit-halogenfreien-Treibmitteln-1.pdf).
Hardened adhesives and sealants are disposed of as residual waste
•
(black bin). Residual quantities of solvents, as hazardous waste,
must be handed into the respective disposal company or collec-
tion point. The technical data sheets can be requested from the
individual manufacturers.
Dated 11/2021
Previous instructions become invalid.
please either contact your local sales repre-
11 / 12