Artrom BV-N18 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Liquidificador Artrom BV-N18. Artrom BV-N18 12 páginas.

6. For quick or delicate blending tasks, turn the speed knob to T position and hold for a few seconds and then

release, the knob will reset to O position automatically. Operate several times until the consistence you

want is obtained

7. If you want to add ingredients while the blender is working, remove the measuring cup and place through

the lid opening. （See Fig.7）

8. When crushing ice or hard food, keep one hand firmly on the lid.

9. When the consistence you desire is obtained, turn the knob to O position.

Note:

1) For each use, the consecutive operation time should not exceed 2 minutes. At least 10

minutes rest time must be maintained between two continuous cycles, let the unit cool to

room temperature before performing next operation cycle.

2) If you want to stop the machine during operation, turn the knob to O position anytime.

Fig.6

Important operating tips

·For best circulation of food that are to be blended with some liquid, pour the liquid into the jar first, then add

solids.

·Some of the tasks that cannot be performed efficiently with a blender are: beating egg whites, whipping cream,

mashing potatoes, grinding meat, mixing dough, extracting juice from fruit and vegetable

·The following items should never be placed in the unit as they may cause damage: bones, large pieces of

solid, frozen food, or tough foods such as turnips.

·To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by one through

the lid opening.

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service personnel.

1. Before cleaning, unplug the blender.

2. Always wash immediately after use for easier cleaning. Don't let food dry on the jar assembly as this will

make cleaning difficult.

3. Pour a little warm soapy water into the jar and turn the knob to T position for a few seconds. And then

empty the jar.

4. Dismantle all detachable parts. Lift the jar assembly off the motor unit, to detach the blade assembly by

turning it clockwise from the jar base bottom, and remove the blade assembly (see fig.8). In addition,

detach the jar cover seal ring 1 from the jar cover.

Before blending, add

food to be blended

into the jar.

During blending, add the

ingredient through the lid

opening.

Fig.7