Ashton MT400 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Sintonizador Ashton MT400. Ashton MT400 2 páginas.

Imprimir página

SAFETY NOTICES

Please read the instructions below to ensure that you use the product correctly.

Overall

1. Never use alcohol or other chemicals to clean the unit.

2. Handle carefully. Impact may cause damage to the unit.

Battery use

1. Confirm the correct polarity when putting in a new battery.

2. Take out the battery if you are not going to use the unit for an extended period of time.

3. If the unit is operating unusually, please take out the battery and replace after ten seconds.

4. Replace the battery if the LCD display becomes weak.

5. Please dispose of the used battery appropriately.

TUNER DESCRIPTION

FRONT:

1. Tuner On Button

2. Pitch (UP)

3. Pitch (DOWN)

4. Mode Button

5. Sound Button

6. Metronome On/

Pause Button

USING THE TUNER

Tuning whilst watching the meter (Meter mode).

1. Connect your instrument cable or contact MIC to the tuner's INPUT jack. If you want to use

the internal MIC, do not plug anything into the INPUT jack. The internal MIC cannot be used

when a plug is connected to the INPUT jack.

2. Press TUNER ON button (1). You will enter the meter mode, and the tuning meter will

appear in the display. The upper part of the display will indicate "TUNER" and the most recently

specified calibration (reference pitch) is shown at the left.

3. If you want to change the calibration setting, press PITCH buttons (2) or (3). This setting is

stored when the power is off. Press PITCH buttons (2) or (3) and the calibration setting will

increase or decrease in 1 Hz increments. If you hold down the button, the calibration setting will

change continuously.

4. If you want to change the tuning mode, press MODE button (4). You can then choose a tuning

mode from the selection (Chromatic, Guitar, Bass, Violin or Ukulele). Any instrument can be tuned.

USER MANUAL

7. Tempo (UP)

8. Tempo (DOWN)

9. Beat Button

10. Value Button

11. Sound Button

12. Metronome On Switch

LED:

LED DISPLAY:

A: A4 (410-490 Hz)

B: Tempo ( 30-280 bpm)

C: Meter Display

D: Beat

E: Value

F: String Number

G: Note

H: Model Display