Asko D5434XXL B Manual de Instruções - Página 8
Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça Asko D5434XXL B. Asko D5434XXL B 20 páginas.
Imprimir página
Normal wash
Use to wash normally soiled dishes, such as plates, serving
dishes, cups, glasses, and so on.
Eco wash
Use when you want to save energy. For normally soiled dishes.
Quick wash
This program is used for glasses and porcelain that is lightly
soiled, such as coffee cups.
Rinse & Hold
Use to rinse dishes while you wait for the dishwasher to become
fully loaded.
Selecting Options
To select an option, press one of the option buttons. The field
next to the button lights when the option is activated. The available
options depend on the selected program. Once you have started
the program, the options you selected are saved for the next time
you use the same program. An exception is the Delayed start
option.
High temperature
Activate this option for improved dishwashing results. The
machine then uses a higher temperature for the main wash.
If you want to use the lower temperature, press until the field next
to the button turns off.
You can vary the temperature as shown below:
Sanitation wash:
Normal wash:
Heavy wash:
Quick wash:
Eco wash:
Long dry
A higher temperature in the final rinse and a longer drying phase
improves the drying result if you activate the Long dry option.
This causes a slight increase in energy consumption.
If you want a program with Short dry, press so that the field next
to the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start 1-24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
8
150 °F (65 °C) / 160 °F (70 °C)
130 °F (55 °C) / 150 °F (65 °C)
140 °F (60 °C) / 150 °F (65 °C)
85 °F (30 °C) / 140 °F (60 °C)
120 °F (50 °C) / 140 °F (60 °C)
Customer Care Center 1-800-898-1879
2 Press Start/Stop and the dishwasher counts down 1 hour at
a time and starts after the selected delay.
Press and hold Start/Stop for five seconds if you want to cancel
the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the program.
Start the dishwasher
Press and hold Start/Stop until the display flashes three times
with the remaining time. This indicates that the program has
started. Close the door properly, otherwise the dishwasher will
not start. The display indicates
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last program run.
Time remaining
Once you have selected a program and options, the display
indicates how long the program took the last time it was used.
Once you have started the dishwasher, the display indicates how
much program time remains. The remaining time is updated after
the water for the final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the
ambient temperature, and other factors.
The time counts down while the program is running and the
remainder of the program is displayed. The remaining time is
displayed, e.g., 1:15, meaning that 1 minute 15 seconds of the
program remains.
NOTE!
During the first run of each program, the remaining time
displayed can be slightly misleading, as the dishwasher is
estimating the time. When you run the program a second time,
the dishwasher will calculate the remaining time based on the
previous duration of the program.
Stopping or changing a program
If you want to change programs after starting the dishwasher,
open the door then press and hold Start/Stop for five seconds.
Add more detergent if the lid of the detergent dispenser has
opened. Then choose a new program, press Start/Stop, and close
the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically. Add the
dishes, close the door, and the dishwasher resumes the program.
www.askona.com
if the door is open.