Asko D5526XLFI Manual de Instruções - Página 14

Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça Asko D5526XLFI. Asko D5526XLFI 20 páginas.
Também para Asko D5526XLFI: Manual de Conceção (20 páginas), Manual de Conceção (20 páginas)

Imprimir página

Problem

The dishwasher does not start.

Water remains in the dishwasher above the

filters.

Bad odor in dishwasher.

The dishes are not dry enough.

Cannot close door.

The touch buttons do not react when

pressed.

Possible causes

The Start/Stop start button has been pressed

for too short a time.

The door is not properly closed.

A fuse/circuit breaker has been tripped.

The plug is not plugged into the power outlet.

The water supply valve is turned off.

Overflow/leaks.

A whirring sound (the drain pump) is heard

from the dishwasher and does not stop when

the power is cut with the On/Left-on mode

button.

Blocked drain hose.

Kink in drain hose.

The filters are blocked.

Debris in the drain pump.

Dirt around the seals and in corners.

Low temperature programs have been select-

ed for a prolonged period.

Drying power too low.

The dishwasher is not fully loaded.

Rinse aid needs topping up or dosage is set

too low.

The baskets are not correctly positioned.

You have pressed the touch buttons too soon

after opening the door.

Dirt on the touch buttons.

If this symbol appears on the display,

the door is not open enough.

Child lock (button lock) activated.

Action

Press and hold Start/Stop until the display

shows

(the door open symbol). This

indicates that the dishwasher is ready to start.

Check.

Turn off the water supply valve. Pull out the

plug and call the Customer Care Center.

Loosen the drain hose from where it termi-

nates. Check that no debris has clogged the

hose. Is the cone-shaped part of the drain

boot cut to the maximum size of the fitting

where it attaches?

Check that the hose is free from kinks and

sharp bends.

Clean the coarse and fine filters.

Clean the drain pump. See the section Care

and maintenance instructions.

Clean with dish brush and low foaming

cleaner.

Run a program with a higher temperature

about once a month.

Activate the Long dry option.

Fully load the dishwasher.

Top up with rinse add or increase the rinse

aid dosage. See the sections Before washing

for the first time and Settings.

Open the door a little once the program has

finished.

Check that the baskets are correctly posi-

tioned horizontally.

Check that the dishes are not blocking the

baskets from sliding properly into place.

Wait a moment then try again.

Clean with a dry or slightly damp cloth.

Open the door until the display illuminates or

close the door and wait 30 seconds. Then

open the door.

See the section Settings.