Asko TDC145V Manual de Instruções - Página 19

Procurar online ou descarregar pdf Manual de Instruções para Secador Asko TDC145V. Asko TDC145V 20 páginas. 400v

DOOR HANGING

You can choose whether the door is hung on the right or

the left.

Follow these instructions:

1. Remove the plinth.

2. Remove the hinge, two screws.

3. Lift the door up and remove it. Support the door at the

same time.

4. Remove both door pins (top and bottom). Fit them on

the other side of the machine. Reﬁ t the hinge.

5. Also change the hole plug (A) (on top) and the door

hinge bushing (B) (at the top and on the bottom), and

replace them on the other side of the door.

(A)

Use a ﬂ at-bladed screwdriver to remove the plugs.

NOTA!

Be careful not to damage the appliance with the

screwdriver.

(B)

6. Loosen the screws (13 in total) on the inside of the

door.

7. Loosen the inner part of the door (pull down and lift

out).

8. Switch the catch (magnetic lock) and the cover plate.

First loosen the screw holding the catch (magnetic

lock) in place. Then use a ﬂ at-bladed screwdriver to

remove the cover plate. Reﬁ t the catch (magnetic

lock) and the cover plate on the other side.

9. Reattach the inner part of the door with the screws

(13 in total).

10. Loosen the two screws holding the handle in place

on the door. Push out the two plastic plugs inside the

screw holes on the other side of the door. Use the two

screws to attach the handle to the other side of the

door and press the plastic plugs into the holes where

the handle was previously ﬁ tted.

11. Reﬁ t the door by loosening the hinge screws slightly,

aﬃ xing the door and closing it. Retighten the hinges.

Replace the plinth.