AMCOL 6000P Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Системы смазки AMCOL 6000P. AMCOL 6000P 19 страниц. Pneumatically controlled precision lubrication system
Печатать страницуNo or Low Dispersing Air
Manifolded dispersing air pressure set too low: adjust.
•
Air hose is kinked or cut: repair or replace.
•
Spray tip is clogged: clean or replace.
•
Spray tip is damaged: replace.
•
Air in Liquid Line
Fluid line is not properly attached to pump: replace hose or fitting.
•
Injector seal is failing: rebuild or replace.
•
Liquid Drains from Spray Tip
Injector check valve is failing: rebuild or replace.
•
Liquid line in single point nozzle assembly is damaged or disconnected: replace
•
8 T60A Posi-pump Troubleshooting
No Liquid
Pump is turned off: turn liquid adjustment screw counterclockwise.
•
Pump is seized: remove, clean, and rebuild.
•
Reservoir is empty: fill.
•
Air pressure is too low: adjust to over 60 PSI.
•
Bubbles from Injectors
Air seals are leaking: replace.
•
Exit fitting is leaking: replace.
•
Liquid Drains from Injector Outlet
Exit fitting is leaking: replace.
•
Evacuation valve is ineffective: clean or replace.
•
Biaxial hose is trimmed incorrectly: be sure hose is cut straight with no burrs or
•
deformities.
6000P PNEUMATICALLY CONTROLLED PRECISION LUBRICATION SYSTEM
Operator's Manual
P A G E | 9