Aero-Spa Aero-pool Руководство по установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке для Горячая ванна Aero-Spa Aero-pool. Aero-Spa Aero-pool 13 страниц.

Occasionally GFCI breakers will experience nuisance tripping.

This will shut off the power to the equipment. If this occurs,

press the "reset" button. If pressing the "reset" button does not

start the equipment, unplug the cycle timer and press the

"reset" button again. If the "reset" button does not "hold in",

replace the GFCI breaker. If the button does "hold in", plug the

generator power cord into the GFCI breaker and circumvent the

cycle timer. Press the "reset" button again. If the "reset" button

does not "hold in" replace the GFCI breaker. If the "reset"

button does "hold in" contact Aero-Spa, LLC.

Do not operate this equipment without a GFCI breaker installed.

Maintenance and Care

This product has no user serviceable parts. If service is

required, contact Aero-Spa, LLC. Attempts to service the ozone

generator will void the customer satisfaction policy, Limited

Warranty, and expose the user to electrical shock which may

cause severe injury or death.

Keep the area around the product free of leaves and other

debris. If debris enters the product through the air intake holes,

unplug the product and carefully remove the debris. Restart

product.

The diffuser stone can be cleaned with a 3% hydrogen

peroxide solution or muriatic acid.

Fill & Start-Up Recommendations

Our customers have been using the Aero-Pool system as the

primary water treatment process for years with limited harsh

chemicals. Because we cannot control how your pool is

used/maintained and according to the EPA we must

recommend maintaining at 2 PPM of an approved residual

sanitizer to minimize cross contamination of users.