Canon Color imageCLASS MF8350Cdn Руководство по эксплуатации - Страница 29
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Принтер "все в одном Canon Color imageCLASS MF8350Cdn. Canon Color imageCLASS MF8350Cdn 33 страницы. Canon imageclass mf8350cdn: quick start
Также для Canon Color imageCLASS MF8350Cdn: Руководство по эксплуатации (29 страниц), Руководство по эксплуатации (28 страниц)
Печатать страницу
1
2
Preface
Installing the Machine
Checking the IP Address
Press [
] (Status Monitor/Cancel).
Select with [
] or [
and then press [OK].
IPv4
IP Address
Subnet Mask
Gateway Address
Host Name
Check the network operation.
Start the web browser of a
computer which is connected
to a network.
Check that the screen of the Remote UI is displayed.
3
Configuring and Connecting the Fax
Select with [
then press [OK].
Status Monitor/Cancel
Copy Job Status
Fax Job Status/Hist...
Print Job Status/Hi...
Network Information
Check the IP address.
],
IP Address
192.168.0.215
If the IP address displayed on the screen is between
"169.254.1.0 and 169.254.254.255"
This IP address is the one assigned by the AutoIP function.
If an IP address other than link-local addresses is set for the
computer, set an IP address in the same subnet as the computer
(other than link-local addresses) also for this machine manually.
This enables the installer to search for this machine.
Enter
"http://<IP address of the
press the [ENTER] key on your keyboard.
The <IP address of the machine> is the
address checked in Step
Input Example:
4
Connecting to a Computer and
Installing the Drivers
] or [
], and
e-Manual "Setting IPv4 Address"
e-Manual "Setting IPv6 Address"
machine>/" in the address field, and then
.
http://192.168.0.215/
When the machine is connected to a switching hub
You may not be able to connect the machine to a network even
though your network settings are appropriate. Delaying the
machine's network startup time may solve the problem.
e-Manual "Specifying the Wait Time until the Machine Connects
to a Network"
When the Remote UI is not displayed
Check the following.
•
Whether the computer and hub are connected using a LAN cable
•
Whether <Remote UI On/Off> is set to <On>
e-Manual "System Settings"
Appendix
Press [OK].
Network Information
IPv4
IPv6
Press [
] (Status Monitor/
Cancel) to close the screen.
A-3
27