Canon PIXMA MX882 Series Руководство по настройке сети - Страница 5
Просмотреть онлайн или скачать pdf Руководство по настройке сети для Принтер "все в одном Canon PIXMA MX882 Series. Canon PIXMA MX882 Series 34 страницы. Using your multifunction with additional computers on your network mac os
Также для Canon PIXMA MX882 Series: Руководство (10 страниц), Руководство по установке (23 страниц), Руководство по настройке сети (14 страниц), Руководство по настройке сети (19 страниц)
Печатать страницу
Check 5
Is TKIP set as an encryption standard when the access point is configured to
communicate using IEEE802.11n standard only?
If the encryption standard of the access point is set to TKIP, IEEE802.11n cannot be
used as a communication standard.
Set the encryption standard to other than TKIP or set the communication standard to
other than IEEE802.11n, then configure wireless LAN settings again.
•
For details on how to change the settings of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
Glossary
•
DHCP function
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
•
MAC address
A unique number assigned to each network device.
•
MAC address filtering
A function to block access from unauthorized wireless devices by saving the MAC addresses of specific
wireless devices (computers, printers, etc.) to the access point beforehand.
Multiple access points with the same name exist. is Displayed
Check
The message appears when multiple access points with
the same name are found.
When you have only one access point
Select Use one AccessPoint only, then select the MAC
address of the target access point.
•
For subsequent operations, go to
/
in "Entering the Access Point's Wireless LAN Settings
Directly on the Machine" on page 11.
•
For details on how to check the MAC address of the access
point, refer to the manual supplied with the access point or
contact its manufacturer.
When using multiple access points
Select Use multiple AccessPoints.
•
For subsequent operations, go to
Point's Wireless LAN Settings Directly on the Machine" on page 11.
Glossary
•
MAC address
A unique number assigned to each network device.
or
/
or
/
/
in "Entering the Access