Asus AP6000 Справочное руководство по аппаратному обеспечению - Страница 23
Просмотреть онлайн или скачать pdf Справочное руководство по аппаратному обеспечению для Сервер Asus AP6000. Asus AP6000 32 страницы. Dual pentium® ii server
Печатать страницу
II. System Components
SCSI ID Setting
SCSI ID settings are made through DIP switches located on the SCSI board.
Each SCSI board IDSEL switch has default settings as labeled below. The
default settings were set for use with a 2-channel SCSI card. Each channel
may repeat the SCSI ID numbers of another channel. Make sure that each
IDSEL switch (on each channel) has its own unique setting if making changes
to these switches. See next page for more information on SCSI ID settings.
68pin Wide SCSI
Connector
SCSI Board back side
SCSI ID Dip Switches
The following illustrates the different possibilities using the dip switches.
IDSEL0 Default
ON
ON
Setting for SCSI ID #0
IDSEL1 Default
ON
ON
Setting for SCSI ID #1
IDSEL2 Default
ON
ON
Setting for SCSI ID #2
IDSEL3 Default
ON
ON
Setting for SCSI ID #3
AP6000 Hardware Reference Guide
ON
Setting for SCSI ID #8
Setting for SCSI ID #4
ON
Setting for SCSI ID #5
Setting for SCSI ID #9
ON
Setting for SCSI ID #6
Setting for SCSI ID #10
ON
Setting for SCSI ID #7
Setting for SCSI ID #11
Notch Out (top)
SCSI Board Power
IDSEL0
IDSEL1
SCSI ID Switches
IDSEL2
IDSEL3
Notch In (bottom)
ON
Setting for SCSI ID #12
ON
Setting for SCSI ID #13
ON
Setting for SCSI ID #14
ON
Setting for SCSI ID #15
23