Amprobe BT-120 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Испытательное оборудование Amprobe BT-120. Amprobe BT-120 10 страниц. Breaker tracer
Также для Amprobe BT-120: Руководство пользователя (12 страниц)

Печатать страницу
Amprobe BT-120 Руководство пользователя
Using the BT-LFA Incandescent Light Fixture Adapter (BT-250 only)
1. Remove the light bulb exercising the proper caution.
2. Screw in the BT-LFA adapter.
3. Plug the Transmitter into the BT-LFA (Figure 3).
4. Preform scan following directions in step 4 under "Operation."
Using the BT-VLA High Voltage Leads Adapter (BT-250 only)
The BT-250 Transmitter can be used alone on 110V circuits. For circuits up to
250V or exposed circuits, use the BT-VLA and follow the directions listed below.
1. Plug Transmitter into high voltage lead receptacle. Be sure that the
Transmitter is completely seated and that no part of the Transmitter
prongs are exposed.
2. Attach the high voltage leads to the terminal or conductor while
exercising extreme caution (Figure 4).
3. Preform scan following directions in step 4 under "Operation."
.800.561.8187
Figure 3
Figure 4
5
www.
.com