AMS TMD2620 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Блок управления AMS TMD2620. AMS TMD2620 14 страниц. Proximity sensor evaluation module
Также для AMS TMD2620: Краткое руководство по эксплуатации (5 страниц), Руководство пользователя (13 страниц)

Establishing basic functionality

The software should be started selecting ams->TMD2620 EVM->TMD2620 EVM command in the

Windows menu or by double clicking the AOS_EVM.exe file from the installation directory. The

default installation directory, depending on the device and the operating system you are using, is:

C:\Program Files\ams\TMD2620_EVM Windows 32 bit operating systems

C:\Program Files (x86)\ams\TMD2620_EVM Windows 64 bit operating systems

A different install path may be selected by the user. When started, the TMD2620 window will open

on the PC.

The balance of this document identifies and describes the controls available on the GUI. In

combination with the TMD2620 datasheet, the QSG and application notes available on the ams

website, www.ams.com. There should be enough information to allow evaluation of the TMD2620

device.

2.1

On successful initialization, the software displays a main window, containing controls pertinent to

the connected device. If the software detects an error, it will display an error window.

If "Device not found or is unsupported" appears, verify that the correct daughterboard is properly

connected to the motherboard. If "Cannot connect to EVM board" appears, verify the USB cable is

connected. A green LED on the EVM Controller will flash to indicate that the USB cable is

connected and providing power to the system.

If the EVM board is disconnected from the USB bus while the program is running it will display an

error message and then terminate. Reconnect the EVM board and restart the program.

page 5/13